Al contenuto della pagina

One Control Minimal Series White Loop

5.0 su 5 stelle su 4 valutazioni dei clienti ()

Commutatore A/B e looper per effetti a pedale

  • La funzione Flash Loop consente di scegliere tra Green Loop e Red Loop
  • Buffer BJF di alta qualità (commutabile)
  • Può essere utilizzato come uscita accordatore/interruttore mute
  • 2 uscite DC a spina cava (2,1 x 5,5 mm) per il collegamento diretto all'alimentazione
  • True bypass
  • Footswitch: bypass
  • Footswitch verde/rosso (selezione loop)
  • LED di funzionamento
  • Alloggiamento in metallo
  • Ingresso/uscita: jack mono da 6,3 mm
  • Send/Return: jack mono da 6,3 mm per invio/ritorno
  • Funziona con un alimentatore a parte da 9 V DC con spina cava da 2,1 x 5,5 mm, polarità negativa al centro (non incluso nella fornitura)
  • Funzionamento passivo possibile senza alimentazione elettrica (esclusi LED di stato, circuito buffer BJF e uscite con connettore DC)
  • Dimensioni (L x P x A): 66 x 121 x 49 mm
  • Peso: 390 g

Attenzione: il funzionamento a batteria non è supportato

Nota bene Registra il tuo acquisto presso shop.warwick.de/en/warranty-registration per una estensione di garanzia a 4 anni.
  • In catalogo dal Ottobre 2024
  • Numero di articolo 602532
  • Unità incluse 1 Pezzo
  • Tipo Looper
  • LED-Meter Si
  • Connettore PSU Si
  • Tipo Effetto a pedale
  • Interfaccia MIDI No
€ 80
Tutti i prezzi incl. IVA
Disponibile a breve (normalmente 2-5 giorni)
1

4 Valutazioni dei clienti

5 / 5

Caratteristiche

Qualità

3 Recensioni

google translate de
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
H
Sicher gutes Teil aber für mich unbrauchbar
Hannes375 22.09.2025
Ich benötige 3 Sounds: Amp Clean, Amp Zerre und Amp Clean + Fuzzpedal. Das sind somit meine 3 Zerrstufen. Wenn ich nun aber von Amp Zerre auf Amp Clean + Fuzzpedal umschalten möchte sind dies 2 Schaltvorgänge am Pedalboard. In die andere Richtung natürlich das Gleiche.

Mir ist schon klar dass ich das mit einem Switcher wie dem Carl Martin Octa Switch oder günstigeren Alternativen lösen könnte aber das will ich eigentlich nicht am Board haben. Ich dachte dass ich das Problem mit dem One Control lösen kann aber Achtung: das funktioniert nicht!

Ich habe alle möglichen Steckvarianten ausprobiert. Dafür kann das Pedal nun nichts und es ist super verarbeitet usw. - daher kann ich auch keine Sterne abziehen. Aber nur falls auch jemand von Euch auf diese Idee kommen sollte.
Caratteristiche
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate fr
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
A
solide et efficace
ApaloXIII 18.06.2025
je cherchais un produit qui pouvait faire à la fois boucle d'effet et buffer, cette pédale fait les deux et comble parfaitement mon besoin.
solide et discrète elle m'a juste donné un peu de fil à retordre sur son emplacement dans le pedalboard car les câbles arrivent d'un peu partout.
Caratteristiche
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate de
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
f
fleischfachverkaeuferin 11.07.2025
macht was es soll: schaltet auf dem Bassboard zwischen clean (mit Kompressor) und dirty (ohne Kompressor) um, also als eine Art Channel-Switch. Grund ist, das mir Kompressoren vor Drive-Pedalen noch nie gefallen haben (weder bei Bass noch Gitarre), ich aber nur einmal treten möchte. Nur wenn dahinter mal ein Delay läuft hört man das Schalten etwas deutlicher. Für mich ist das aber kein wirklicher Nachteil. Wenn man keinen komplexen Schalter für unter Effektgruppen braucht, weil man Modulation nur selten zuschaltet, ist das hier genau das Richtige.
Caratteristiche
Qualità
0
0
Segnala un abuso

Segnala un abuso