Al contenuto della pagina

Mixer a 10 canali

  • 4 ingressi microfonici con EQ a 3 bande
  • 4 inserti e 2 compressori a manopola singola
  • 4 ingressi di linea: jack da 6,3 mm
  • 1 ingresso di linea su jack stereo da 3,5 mm
  • Interfaccia USB 2 x 4
  • Unità GigFX integrata con 24 effetti
  • Filtro low cut da 100 Hz
  • 2 interruttori Hi-Z
  • Alimentazione phantom a 48 V
  • Collegamento per le cuffie
  • Collegamento per footswitch
  • Supporto iOS con adattatore opzionale per fotocamera da Lightning a USB 3.0 per il collegamento ad iPad e iPhone (adattatore non incluso)
  • Dimensioni (L x P x A): 272 x 302 x 84 mm
  • Peso: 2,2 kg
  • Include software di registrazione Waveform OEM
  • Borsa consigliata per il trasporto: art. 473654 (non inclusa, acquistabile separatamente)
  • Custodie protettive consigliate: art. 485223 o art. 493959 (non incluse, acquistabili separatamente)
  • In catalogo dal Dicembre 2019
  • Numero di articolo 473564
  • Unità incluse 1 Pezzo
  • Canali utilizzabili parallelamente 7
  • Mic-In 4
  • Stereo-In 3
  • Master Out XLR
  • Numero massimo di Pre Aux 0
  • Interfaccia PC USB-B
  • Registratore Multitrack No
  • USB/SD Direct Record No
  • PFL No
  • Processore Effetti 1
  • USB Play No
  • Bluetooth Play No
  • Foot Switch Switch
  • Matrix Mixer No
  • Zones 0
  • 19" Rackmount No
  • Larghezza 272 mm
  • Profondità 302 mm
  • Altezza 84 mm
  • Peso 2,2 kg
  • Canali utilizzabili contemporaneamente 7
  • Line in Mono 4
  • Mono Line-in 4
  • Hi-Z Input 2
  • Phantom Power 48V
  • Uscita Master XLR
  • Output 1
  • Aux Ways 1
  • Numero di Pre Aux max. 0
  • Ingresso dell'interfaccia audio 4
  • Audio Interface Input 4
  • Uscita dell'interfaccia audio 2
  • Audio Interface Output 2
  • Registrazione diretta su USB/SD No
  • Low Cut Si
  • Insert Si
  • Compressore Si
  • Panorama Si
  • Effekt Prozessor 1
  • Lamp Connector No
  • Collegamento della Lampada No
  • Interruttore a pedale Contatore
  • Borsa 473654
  • Zone 0
  • Rackmount No
€ 239
Tutti i prezzi incl. IVA
Disponibile
1

56 Valutazioni dei clienti

4.6 / 5

uso

Caratteristiche

Suono

Qualità

40 Recensioni

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
RJ
Mackie Pro FX10v3
Roger J Anstey 24.06.2020
My wife is an ex pro singer and use the Mackie Pro FX10v3 Mackie SRM 450 speakers for charity gig`s in Spain. At the gig`s we get very good feed back on the quality of sound and effects. being a solo singer and using backing tracks it?s size is small but has everything to give good sound and am constantly asked what I am using. The strength of volume with out distortion or feed back appears to shock other artists. the USB connection is second to none again enhancing the Quality of the input to output. I have used many combinations over 40 years of performing and this is the best so far! I can not fault this equipment!!
uso
Caratteristiche
Suono
Qualità
10
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
H
No surprises
Happymonday 20.12.2021
I bought it for home studio. It works fine, it is quality built.
If feels sturdy and there is no noise. As I wrote in headline, there are no surprises. + you get some cool software products.
uso
Caratteristiche
Suono
Qualità
4
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
i
Just a false light, unfortunately.
ingmarp 03.03.2025
I needed to replace my old Mackie 1202 VLZ3 because of the failure of the transformer and the preamp of 1 channel after more than 15 years of service. I had the choice between going for the VLZ4 version and try something new that could allow me not to pass through a dedicated digital audio interface for pc recording.
Mackie ProFX10v3 seemed to be the good choice in the same price range. Wrong choice! The more I use it the more I see its limitations.

the pros:
- USB connection (whatever limited to 2 channel recording)
- compressor on 2 channels
- HI impedence switch on 2 channels

the cons:
- junk onboard effects, almost unusable because of the lack of control over them (you can control just the mix, no parameters are tweakable). must be a reason if the more complete Mackie ProFX10v3+ is 40% more expensive!
- limited routing possibilities (on the 1202 VLZ you had the ALT 3-4 option)
- only 1 fx send (on the 1202 VLZ you had 2 fx send)
- 8 real channels (line 9-10 are almost used for USB connection or for a 1/8 TRS)
- absence of the useful (for me, at least) tape-in and tape-out connection (for additional connection to other audio sources) in addition to the "real" 12 channels

All in all, the feeling I have is that Mackie tried to jump in the USB DAI mixer segment adding gadgets and betting on brand reputation. For good amateur USB DAI mixers better look elsewhere. Just a false light, unfortunately.
uso
Caratteristiche
Suono
Qualità
2
2
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
M
Myguel 31.03.2026
Before Mackie, I used Soundcraft in my home studio with a few synths and a guitar. Compared to Mackie, it's practically noise-free! The routing is very convenient, but it takes some getting used to—it's not a standard implementation. 24/96 works perfectly, no latency! The headphone output is incredibly loud—it can drive any high-impedance headphones! A great option for a home studio and beyond! Thank you, Thomann.
uso
Caratteristiche
Suono
Qualità
0
0
Segnala un abuso

Segnala un abuso