Rockboard ISO Power Block V9 IEC

In se è un'ottimo alimentatore. L'unico riscontro negativo è il fatto che non entra nella parte centrale inferiore della pedaliera "Rockboard TRES 3.3". Per farlo entrare bisogna smontare e togliere uno dei due rinforzi e montarlo con il velcro, ma con il calore si stacca perché scioglie l'adesivo. Ho ordinato la piastra apposita "Rockboard The Tray", e forse, spostando leggermente uno dei due rinforzi con un po' di bricolage (bisogna rifare due fori e rimontare uno dei rinforzi), si può montare questo alimentatore in modo abbastanza pulito. Curioso però il fatto che la modularità Rockboard non sia tale tra alcuni dei suoi elementi principali.

After frustratingly buying two cheaper so called isolated? power supplies elsewhere, I opted to up my budget for this Warwick supply from Thomann. This was to be a wise decision.

To clarify, I was shocked at the level of noise from the cheaper readily available power bricks. Running only 6 pedals with low power needs/draw. The hum and hiss was too noticeable to say the least. I checked my pedals and cables by running them on batteries and individual ac power supplies, as expected the noise was gone and the power bricks were clearly at fault or not truly isolated as advertised.

This Rockboard has no such issues and is very quiet indeed, it has more power available than the others I tried, so maybe this plays into it? Those more knowledgeable can decide. I am running my board along with good quality cables and a dedicated buffer beginning and end of chain and the results are fab, only an acceptable amount of hiss on the gain pedals, but nothing too distracting or that couldn't be looped out with a gate. Most importantly no hum or annoying artifacts in the sound.

It seems really well constructed all metal and has a small enough form factor. The supplied power cables are branded and of a reassuring sturdier feel than the others I had tested. The USB port is a nice touch for charging phone running a light etc. Basically this supply it does what is describes extremely efficiently.

In conclusion, to be fair I am comparing this to other power bricks at a third of the cost. So I can't offer up how it would compare to others at this price point. That said if other bricks are even better than this then must be truly awesome as this one is as silent and functional as I would ever need.

Highly recommended.

I needed a new power supply and thought I would invest in the Rockboard ISO Power Block V9 IEC.

The reason being is I had a Rockboard with the mod 1 patch bay, the IEC connection seemed to be better and stronger than the flimsy 18v adapter cable I was using.

The robustness of the ISO Power Block V9 IEC is brilliant, and works exactly how it should… but, I use a Rockboard Tres 4.1 and the Power block doesn’t fit underneath, and doesn’t fit on the tray either.

Eventually, I have use the tray to shield the power block, and velcroed the power block to the underside of the board.

I have had to cautiously thread the IEC lead through the middle spindle of the board. Just remember to measure the area and ensure it fits before you purchase, plan where you are going to put it.

Apart from the above, the Power block works seamlessly and the IEC connections are a bit more solid.

As a UK customer, Thomann even supplied me with a UK IEC powerlead too.

I use Thomann to buy all my Rockboard accessories as the customer service is second to none, and the inventory of stock they have is amazing.

The Rockboard ISO Power Block V9 IEC is definitely worth buying.