Al contenuto della pagina

Isolation Box

  • Passive isolation box with the highest signal fidelity
  • Isolation and elimination of hum caused by ground loops
  • Balancing for live and recording applications
  • Can be used in both directions and both jacks can process the signal either balanced or unbalanced
  • Requires no power supply
  • Input: XLR
  • Output: 6.3 mm stereo jack
  • Dimensions (W x D x H): 47 x 72 x 34 mm
  • Weight: 206 g
  • Made in Germany
  • In catalogo dal Aprile 2023
  • Numero di articolo 564918
  • Unità incluse 1 Pezzo
  • Unità multi-canale No
  • Canali 1
  • Attivo / Passivo Passivo
  • 19" No
  • Pad intercambiabile No
  • Switch Gnd/Lift No
  • Alimentazione a batterie No
  • Speaker Simulation No
€ 111
Tutti i prezzi incl. IVA
Disponibile
1

1 Valutazioni dei clienti

5 / 5

Caratteristiche

Suono

Qualità

1 Recensione

r
...not just problem solver – system enhancer, too!
rbbrnck 14.08.2025
i have two (bass) amps [that i use for voice, synths, guitar, and bass] fronting me from the other side of the room, opposite corners (as in left-and-right) – with all troubles happening in between.

fare's too long for unbalanced lines, to start with – then you have signal source, amp left, and amp right plugged into different AC mains outlets... ground loops, hi-freq interferences, unsymmetrical grounding, you name it.

benefit one: instead of taking source signal at the unbalanced, 1/4" l+r outputs of my Helix Rack, i'm now running two long (balanced) cables plugged into its 3-pole XLR outputs – the end of each going straight into the Lehle P-ISO XLR·TRS; a short, made to measure jack-to-jack cable feeds into the amp input.

where's the benefit: there's a superb 1:1 audio transformer inside the Lehle P-ISO, which not only sets a most convenient impedance value across the line, but serves as a galvanic isolator, too – meaning that the signal ground is physically separated from the mains grounding of the three devices (farewell ground loops' hum and interferences).

where's a(nother) benefit: as any normal 2-pole 1/4" jack into the P-ISO output shunts the inverting leg of a balanced line to ground, signal voltage is exactly halved (which amounts to -6dB) – so any line level signal (like the Helix Rack balanced outputs, and my Mackie Onyx mixer's, too) can more comfortably seat within a safe level window that won't saturate the amp's input stage, resulting in a smoother, wider range of volume control.

problem's solved, system can now alternatively accomodate a small mixer, too, and the amps' volume fits exactly where it belongs (on the -10dB "Active" input settings)... bingo – Lehle!
Caratteristiche
Suono
Qualità
0
0
Segnala un abuso

Segnala un abuso