Al contenuto della pagina

Babicz FCH 4 String Bass Bridge N

4.0 su 5 stelle su 1 valutazioni dei clienti ()
  • Ponte per basso elettrico
  • Versione a 4 corde
  • Per basso elettrico in stile P e J
  • La costruzione Full Contact eCAM consente di massimizzare la superficie di contatto con il ponte
  • Per un suono e un sustain migliorati, con regolazioni completamente personalizzabili
  • Montaggio a 5 fori
  • Attacco delle corde nella parte superiore del ponte
  • Materiale: alluminio
  • Sellette: eCAM Full Contact
  • Distanza totale delle corde: 57,2 mm
  • Distanza tra le singole corde: 19,1 mm
  • Dimensioni (L x P x A): 79,8 x 66,8 x 16,8 mm
  • Distanza totale fori/bulloni: 70,1 mm
  • Peso: 105 g
  • Colore: nichel
  • Include viti di fissaggio, istruzioni e chiave di regolazione
  • In catalogo dal Febbraio 2023
  • Numero di articolo 553577
  • Unità incluse 1 Pezzo
  • colore Nickel
  • Tipo Ponte per basso
  • Numero di corde 4
€ 116
Tutti i prezzi incl. IVA
Disponibile
1

1 Valutazioni dei clienti

4 / 5

Qualità

1 Recensione

google translate gb
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
X
A bit awkward
Xylops 23.09.2025
A straight swap for the fender bridge on my jazz bass. But you have to dismantle 3 of the saddles to screw the bridge into the 5 screw holes. Be prepared for the little springs jumping all over the place, and they are fiddly to get back in place. Also, with the saddles right back you can’t access the locking nut to adjust the action cos the backplate is in the way. Also the screw adjusters draw the saddles back but will not push them forwards. The holes in the back plate aren’t threaded, so you loosen the adjuster screw then pull the saddle forwards. Bit hit and miss for setting the intonation.
Looks nice and some good points, but I think it could have been so much better with a little more thought at the design stage.
Qualità
0
0
Segnala un abuso

Segnala un abuso