Al contenuto della pagina
compare-box

Adam Hall 6111 Case Angle 35 x 35 mm

5.0 su 5 stelle su 24 valutazioni dei clienti

Aluminium edge protection

  • Dimensions: 35 x 35 mm
  • Weight: 340 g / m
  • Length: 1.00 m / pc

Note: Delivered in 1 m pieces +/ - 5 mm

  • Numero di articolo 103490
  • Unità incluse 1 Pezzo
  • Binario del rack No
€ 3,88
-13% 30-Giorni-Miglior-Prezzo: € 4,44
info
Tutti i prezzi incl. IVA
Disponibile
1
Consegna standard
€ 5,90

Questo articolo è disponibile in magazino e può essere spedito a breve.

24 Valutazioni dei clienti

5 / 5
Valuta ora

Qualità

7 Recensioni

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
D
Great product
Denis6615 01.11.2020
I used these to finish off my DIY boxes. Be careful of the measurements, I went for 35mm for maximum grip around the corners (I was using 18mm plywood) only to find that the corners I was using were cranked to accommodate 30mm case angle, so I had to adapt the ends of each one.
They are easily drilled for fixing, but make sure you file the cut ends to avoid exposed sharp edges.
One small gripe I have is that when picking items from the catalogue, not all items have the same information displayed. In my case, I wanted to compare the weight of these with the plastic versions (which are also narrower). It would be great if all components had measurements and weights displayed. Most have, but not all, so it can sometimes be difficult to compare from the photos.
I used these to finish off my DIY boxes. Be careful of the measurements, I went for 35mm for maximum grip around the corners (I was using 18mm plywood) only to find that the corners I was using were cranked to accommodate 30mm case angle, so I had to adapt the ends of each one.
They are easily drilled for fixing, but make sure you file the cut ends to avoid
I used these to finish off my DIY boxes. Be careful of the measurements, I went for 35mm for maximum grip around the corners (I was using 18mm plywood) only to find that the corners I was using were cranked to accommodate 30mm case angle, so I had to adapt the ends of each one.
They are easily drilled for fixing, but make sure you file the cut ends to avoid exposed sharp edges.
One small gripe I have is that when picking items from the catalogue, not all items have the same information displayed. In my case, I wanted to compare the weight of these with the plastic versions (which are also narrower). It would be great if all components had measurements and weights displayed. Most have, but not all, so it can sometimes be difficult to compare from the photos.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
R
STRONG, RELIABLE AND INEXPENSIVE
RyanK 07.06.2017
DONE A HOMEMADE FLIGHTCASE AND WAS BLOWN AWAY AT THE QUALITY AND CARE TAKEN TO PACKAGE IT FROM THOMANN TO NORTHERN IRELAND.
I ALWAYS USE THOMANN
Qualità
0
0
Segnala un abuso

Segnala un abuso