Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
B
Smooth operator
I got this pot for my Les Paul as I did not want to install a push-pull tone knob. This is the perfect solution for my coil splitting, as it maintains full humbucker mode when at 10 while allowing me to dial in anything between split (1 coil only at 0 position) and humbucking mode.
Good quality, would buy again in a heartbeat.
Good quality, would buy again in a heartbeat.
3
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
E
If, like me, you very rarely ever use your tone pot, and you prefer the option of removing it from the circuit when not in use, this is a good option for you.
I've always found CTS pots to be of good quality, with good action and ratings always well within tolerance levels.
I've always found CTS pots to be of good quality, with good action and ratings always well within tolerance levels.
1
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
NM
A very short shaft
This potentiometer's shaft is shorter than the shaft of standard AllParts 250 or 500 kOhm potentiometers.
I had a hard time screwing in a standard 500 kOhm potentiometer.
For my PRS SE, I cut off the protruding tab on the potentiometer and removed the inner washer.
This potentiometer definitely won't fit "without a load."
I'll be installing it inside the tone control, and the shorter the better.
I had a hard time screwing in a standard 500 kOhm potentiometer.
For my PRS SE, I cut off the protruding tab on the potentiometer and removed the inner washer.
This potentiometer definitely won't fit "without a load."
I'll be installing it inside the tone control, and the shorter the better.
0
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
A
Not entirely satisfied
I'm not sure how I like the tone control on my guitar now. But perhaps I chose the wrong capacitor to go with it..? Maybe. Nonetheless, this is a sturdy pot and it turns great, smooth but not too smooth
0
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
SR
Brittle
This thing feels flimsy and started crackling after a few months. Cleaned with deoxit a few times with the same problem recurring every few months
0
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
JO
Excellent
Fantastic quality part. Smooth feeling and sounds great.
1
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
r
Great control and transparency
The log scale and transparency when turned all the way up makes it fully controllable and truly transparent. Love it.
0
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
D
lots of sizzling sounds
wanted to include in simple mic scheme for self made lap steel, but this brought lots of parasite noise
0
1
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
c
This works great. The quality is great.
Be careful about the length of the shaft - it's really short. It hardly came through the top wood on the Explorer. I also had to widen the hole.
The back of the pot is the candy type shape.
Be careful about the length of the shaft - it's really short. It hardly came through the top wood on the Explorer. I also had to widen the hole.
The back of the pot is the candy type shape.
0
0
Segnala un abuso
Purtroppo si è verificato un errore, ti preghiamo di riprovare più tardi.
s
Cool pot if you like the sound of guitars with no tone pots but also want to have a tone control
0
0
Segnala un abuso